How to maintain automobile checking fixtures?
How to maintain automobile checking fixtures?
In order to ensure that your automobile checking fixtures will not have too many problems, good maintenance can promote the improvement of work efficiency:
a: Ensure the drying of the environmental factors of the automobile checking fixture itself:
The storage temperature is guaranteed to be between 18 degrees Celsius and 22 degrees Celsius
The humidity must be below 30%
The particles cannot exceed 2%
b: Basic maintenance of automobile checking fixtures:
Ensure that the exterior of the checking fixture simulation block is clean, and some positions such as bolts, checking pins, and base plates must be kept clean
The movable parts that need to be disassembled are placed in the corresponding positions
c: The maintenance time can be divided into half a year or once a year
d: Check whether the pin hole is worn or not, and replace it immediately if there is any problem
e: Check whether the precision slide is loose, and add lubricating oil
f: Check whether the positioning datum is worn and rusted, and some are replaced or polished in time
g: Check the marking scale line and coating in time for worn and fall off
h: Dust cover can be covered when not in use
